Table of Contents
Advertisement
Activating FAR Infrared
Light (Heat)
FAR Infrared Light is controlled by the + and -
section. Press this button so the display
flashes. To choose the level of FAR Infrared
Light (Heat) press the+ button to turn up the
heat and the - button to reduce the heat. The
heat range is 30-80 degrees centigrade if you
have a 220v Mat or 86-176 Fahrenheit if you
have a 110v mat.
Holding down the buttons will speed up the
process if required.
Setting the Timer
The timer is controlled by the
To choose your desired session time press
the button once until it flashes and then
press the + button to increase the time
and the - button to decrease the
time. The PEMF Mat is set up for 1-hour
maximum session at 1 minute intervals.
section.
Advertisement
Table of Contents
Need help?
Do you have a question about the Infrared PEMF Mat and is the answer not in the manual?
Questions and answers
Not all the red light turn on is this normal
Yes, it is normal for not all the red lights to turn on for the BON CHARGE Infrared PEMF Mat. Some of the LEDs are Near Infrared (NIR) LEDs, which are invisible to the human eye but can be registered as heat.
This answer is automatically generated