Table of Contents
Advertisement
il PAUSE
Tips
e To release the VCRs from
pause, use the Il PAUSE
buttons on the VCRs so that
you can edit more precisely.
To cut out unwanted scenes
while editing, press Il
PAUSE on this VCR when
an unwanted scene begins.
When it ends, press Il
PAUSE again to resume
recording (Assemble
Editing).
Operation (when recording on this VCR)
Before you start editing
e Press INPUT SELECT to display "L2" in the display window.
e Press TAPE SPEED on the remote commander to select the recording
1
tape speed (SP/EP).
Insert a source tape with its safety
tab removed into the other
(playback) VCR. Search for the
point to start playback and set it to
playback pause.
Insert a tape into this (recording)
VCR. Search for the point to start
recording and press Ii PAUSE.
Press @ REC on this VCR and set it
to recording pause.
To start editing, press the II PAUSE
buttons on both VCRs to release
the VCRs from pause.
For best results, press the pause button on
the other VCR just before pressing
fl PAUSE on this VCR.
To stop editing
Press the Hi STOP buttons on both VCRs.
Editing | 53
Advertisement
Table of Contents
