Setting The Clock - Sony SLV-780HF Operating Instructions Manual

Setting the clock
Notes
* The clock cannot be set
automatically if you don't
receive a channel that carries
a time signal in your area. If
so, set the clock manually
(page 24).
If there are only a few
channels in your area that
carry time signals, setting the
clock automatically may take
up to about 30 minutes. If
nothing happens even after
you wait about 30 minutes,
set the clock manually.
The menu disappears
automatically if you don't
proceed for more than one
minute.
22 | Getting Started
MENU
CURSOR
EXECUTE
Set the time and date to use the timer feature for recording programs.
When you set up your VCR for the first time, you can set the clock using
the EASY SET UP button (pages 11, 13, 15, 17 and 19). You can also set
the clock using the menu.
Using the Auto Clock Set feature
Some TV and cable channels have started to transmit time signals with
their broadcasts. Your VCR can pick up this time signal to automatically
set the clock. After completing the steps below, when you turn off the
VCR, it will automatically search for a channel that carries a time signal
and set the clock. The Auto Clock Set feature only works if a channel in
your area is broadcasting a time signal. If broadcasters in your area are
not yet sending time signals, set the time manually (page 24).
1 Press MENU.
TIMER SET/ CHECK
TUNER PRESET
The main MENU appears on the TV screen.
CLOCK SET
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
ADVANCED OPTIONS
Use [@¥] to select an
item,then push [EXECUTE
2 si press the CURSOR (¢/$) buttons to
move the cursor (I) to CLOCK SET,
(AUT IMANUAL)
then press EXECUTE.
The CLOCK SET menu appears on the TV [FB)10 select
Then push [EXECUTE
3 press the CURSOR (4=/=>) buttons
to select AUTO, then press
(FULLCAUTETOPTIONS)
EXECUTE.
The AUTO CLOCK SET menu appears on UselE]t0 select
the TV screen.
och Ge ea
4 Press the CURSOR (¢/=>) buttons
to select FULL AUTO, then press
EXECUTE.
5 To activate the Auto Clock Set
function, turn the VCR off.
The VCR automatically sets the clock.
The VCR automatically searches for a
channel that carries a time signal and sets
your time zone and daylight saving time
(if applicable).
If your clock sets, but displays the
wrong time zone or daylight saving
time, you can adjust these settings
without turning off the Auto Clock Set
feature (page 23).