Skip Function; Search Function - Technics SC-DV250 Operating Instructions Manual

os 2 eee e e
Refer to illustrations EJ-D] on page 18 of the illustrated booklet.
A Skip function
cb
While playing or paused
On the remote control
Press [SKIP (I< or PP!)].
On the changer
Press [I-44 /<44] or [>> /> 1].
Each press increases the number of skips.
Current position
[>>>] ——>
[>Pl]
B Search function
, [lea/aq] —| :
[\44]
During nar
On the remote control
Press [SLOW/SEARCH (<4 or >> )].
On the changer
Press and hold [I< /<<] or [>>/>P1].
For your reference
Audio will be heard during search for most discs. With DVDs and Video
CDs, audio is heard at the first speed, but you can turn this off if you want to
(DVD and Video CD only =» page 25, Audio—Audio during Search),
(omm-][0)
While play is paused
On the remote control
Press [SLOW/SEARCH (<4 or >P)].
On the changer
Press and hold [44/4] or [>>/>P1].
D Frame- me viewin
notion play
Ri Lont
While play is paused
Press the cursor button [<4] or [>
Each press changes the frame.
¢The frames change in succession if you press and hold a cursor button.
@The frame also advances each time you press [4/00] on the remote con-
trol or [I @] on the changer.
Notes
The speed of search and slow-motion increases up to 5 steps.
@Pross {P] (play) to restart play.
You cannot move backwards with Video CD during frame-by-
frame and slow-motion.
[ld], [4], [44] oF [Ie ea]: Backward
[Pt], [>], [PP] or [> / mI]: Forward
When playing Video CDs with playback contro!
Pressing buttons to perform skip, search or slow-motion may take
you to a menu screen.
Disc selection
Do not;
euse irregularly shaped discs.
®attach extra labels and stickers.
use discs with labels and stickers that are coming off or with adhesive
axuding from under labels and stickers.
@attach scratch-proof covers or any other kind of accessory.
write anything on the disc.
clean discs with liquids. (Wipe with a soft, dry cloth.)
'use discs printed with label printers available on the market.
To prevent damage
Always observe the following points.
@L.oad only 1 disc per tray,
Basic operati E
l.oad discs correctly as illustrated.
An adaptor is not needed with 8 cm discs (singles).
x
8 cm disc
12.cm disc i
Set the system on a flat, level surface.
Always unload all discs before moving the system.
Do not;
eset it on top of magazines, inclined surfaces, etc.
®move the system while tray is opening/closing, or when loaded.
put anything except dises in trays.
use cleaning discs or discs which are badly warped or cracked.
| RQT5S48