Lamp BNX Series User Manual page 12

brightness for 8 hours. Shut down for 1 hour, then turn it on again and run according to this setting.
Execute this program for 2 cycles.
D. After completing Step 3 above, set the screen brightness to 70% and keep 70% of the screen
brightness for 8 hours. Shut down for 1 hour, then turn it on again and run according to this setting.
Execute this program for 2 cycles.
E. After the above test run is completed, set the screen brightness to 100%. Start running for 2
hours and monitor whether the screen functions normally. After everything is normal, set the items
such as screen on/off time, time period brightness switching, screen power temperature monitoring,
screen communication monitoring, etc. according to customer requirements.
3. The LED screen has been installed. If it is not turned on for a long time, the video will be aging. The
aging process refers to the newly installed LED screen's trial operation procedure.
4. For the calibration effect maintenance of the corrected display, please refer to the calibration
maintenance manual attached to our CD-ROM.
DISPLAY
第 8 页
Safety
A BETTER WORLD FOR ALL