Programming The Remote Control - Toshiba CN36G90 Owner's Manual

If more than one number is listed, try each one separately until you
find the one that works.
2 Set the TV/CABLE/VCR switch to "VCR" (or "CABLE").
бә
Number
Notes:
e You have to reprogram the Remote Control when you change its
batteries.
€ Some newer VCR's are capable of working on either of two remote
codes. These VCR's have a switch labeled "VCR1/VCR2".
If your VCR has this kind of switch, and does not respond to all the
STILL LOCATE SWAP
code numbers for your VCR brand name, set the switch to another
position ("VCR1" or "VCR2") and reprogram the Remote Control.
TOSHIBA
CT-9904
Г
For future reference, write the code
you used.
VCR CODE:
= CODE:
PREPARA
Using the Remote with VCR or Cable TV Converter/ Programm the Remote Control