Change Lever,Rotary Encoder; Take-Up Head,Tension Arm Lever - JVC HR-A630MS Service Manual

2.5.12 Sub Brake (supply), Tension Band Assembly, Tension
i beacaes ane revert ie Daren ee
Ally See Lever Assembly,Slit
(4) Remove the tension arm assembly with tension band
brake (take-up).
iskisupp! vy)
assembly.
2} Disengage 1 claw and remove the control cam.
(1) Disengage 1 spring (a).
(5) Disengage 1 spring (b) and remove the take-up lever
(2) Disengage 1 claw and remove the sub brake (supply). assembly.
{3) Take out 1 screw (A), spring (c) and slit washer. {6) Remove the slit disk(supply).
re ——
Take-up Lever
~®
Fig.2-5-15
2.5.10 Slide Plate
(1) Disengage 7 claws from bottom of the mechanism
assembly and remove the slide plate.
Fig. 2-5-16
28
Slide Plate
Fig. 2-5-17
2.5.11 Change Lever,Rotary Encoder
(1) Remove the change lever.
(2) Disengage 2 claws and remove the rotary encoder.
Rotary Encoder
Align the
triangle
marks
Change lever
Assembly
Tension Arm Assembly
Slit washer
Tension Band
Assembly
(A)
Fig. 2-5-19
2.5.13 Take-up Head,Tension Arm Lever
(1) Remove the take-up head and tension arm lever.
Sub Brake (SUP)
Tension Arm Lever
Fig.2-5-20
2-9