PicTURE IN PICTURE (PIP) OPERATION (CONT.)
Picture In Picture (PIP) Operation (Cont.)
With a VCR - No Cable Box
This television includes a two tuner Picture In Picture (PIP) feature.
This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR).
Connect your television to a VCR, as shown
The Remote Control must be programmed with the supplied codes to operate the VCR.
See
Programming the Remote Control! in the Remote Control Quick Reference Guide.
1
AUDIO
VIDEO
R
t
Pa
Phe
Pr
]
0000
TY INPUT
|
© OOO-
INPUT 1
f
OO-
INPUT 2
INPUT 3
PROG. OUT
AUDIO IN © y
i
2
C
ANTINPUT
=-
SSS 7T a
Sea
=
INCOMING CABLE
oil
|
ANT OUT E
CABLES NOT SUPPLIED
TERMINALS ON BACK OF VCR
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note:
| The audio is from the Main Picture only.
To view an external video source in the PIP frame:
.
Press the TV/VIDEO button on the Remote Control to select the same video
input which your VCR is connected to.
°
Verify the VCR is on.
.
Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down button.
°
Choose channels for the PIP trame by pressing the TV button on the Remote
Control and using the PIP Channel up/down buttons
SWAP and RECALL Buttons
The
SWAP
button
switches
the PIP and
Main
Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.