Reference; Controlling Other Tv's With The Remote Control; Maintenance And Service - LG LDA-831 Owner's Manual

Reference

Controlling other TV's with the
Remote Control
You can control the sound level, input source, and
power switch of your LG TV with the supplied
Remote Control.
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (see the table below).
2. Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Manufacturer
LG / GoldStar
Zenith
Samsung
Sony
Hitachi
Notes:
Depending on your TV, some or all buttons may not
•
function on the TV, even after entering the correct
manufacturer code.
If you enter a new code number, the code number
•
previously entered will be erased.
When you replace the batteries of the remote, the
•
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
22

Maintenance and Service

Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide spray
• Do not leave rubber or plastic products in contact
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
Code Number
moistened with a mild detergent solution.
1 (Default), 2
Do not use strong solvents such as alcohol, benzine,
1, 3, 4
or thinner, as these might damage the surface of the
6, 7
unit.
8, 9
Maintaining the Unit
4
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
near the unit.
with the unit for a long period of time. since they
leave marks on the surface.