Touchpad Module Removal
Prerequisite:
Battery Pack Removal
1. Disconnect the touchpad FFC (A) from the mainboard and touchpad module
connectors
(Figure
2. Disconnect the fingerprint FFC (B) from the mainboard and touchpad module
connectors
(Figure
3. Disconnect the Per-Key FFC from the mainboard connector (C)
Figure 1-12. Touchpad Module Removal
CAUTION:
!
Touchpad FFC (Flexible Flat Circuit), fingerprint FFC, and Per-Key FFC, can be
damaged if removed while the touchpad module and mainboard connectors
are locked.
1-12
1-12). Then remove the FFC.
1-12). Then remove the FFC.
A
(Figure
C
B
Disassembly Procedures
0
1-12).