Sony LBT-G3000 Operating Instructions Manual page 6

$S-G3000
Connections
Turn all the power off before making any
connections.
The diagram below shows the system
connections. The letters in the diagram
correspond to those in the text.
r Notes on Connections
+ Connect the AC power cord last.
* Cord plugs and jacks are colour coded.
Red plugs and jacks are for the right
channel (R) and white ones are for the
left channel (L).
Speaker Cord Connection
1 Strip 15 mm of the speaker cord
coating from the end of the cord.
2 Connect the right speaker to the R
(right) speaker terminal, and the
left speaker to the L (left) speaker
terminal, with the red cords to +
and the black cords to -.
Note
When connecting the speaker cords, refer to
the instructions supplied with the speakers,
since different features are sometimes used
to distinguish + and — cords.
FM Antenna Connection
Connect the supplied FM wire antenna to
the FM 75Q terminal and extend
horizontally.
For better reception
Connect to an outdoor antenna.
AM Antenna Connection
Connect the supplied loop antenna to the
AM and + terminals.
You can attach the loop antenna on the wall
using commercially available screws.
For better reception
In addition to the loop antenna, connect an
insulated wire of 6 to 15 meters to the AM
terminal (the lower terminal). Be sure not to
disconnect the loop antenna.