Table of Contents
Advertisement
4U4G Series
3.3 Power Supply
Installing and Removing the Power Supply
Installing the Power Supply Unit
The 4U4G Series can accommodate two AC or two DC power supplies in the bay at the rear
of the chassis. Each unit provides up to 1600 Watts of power. One power supply is required
for full load operation, with the other power supply purely as a redundant, load-sharing
backup. It can be removed without affecting system operation.
1. Align the power supply unit with the power supply slot.
2. Carefully slide the PSU all the way into the power supply bay until it clicks into place.
2
1
17
Advertisement
Table of Contents
