Power Supply - ASROCK 4U8G Series User Manual

3.3 Power Supply

The system can accommodate four AC or two DC power supplies in the bay at the rear of
the chassis. Each unit provides up to
are required for full load operation, with the fourth power supply purely as a redundant,
load-sharing backup. It can be removed without affecting system operation.
Installing and Removing the Power Supply
Before replacing the power supply, power off the server, unplug the power cord, and discon-
nect all wiring from the power supply.
Installing the Power Supply Unit
Align the power supply unit with the power supply slot. Ensure that the LED appears on
the lower right when you are installing the power supply unit.
1. Carefully slide the PSU all the way into the power supply bay.
2. Make sure the power supply clicks into place and is well installed.
1600 Watts (200V AC)
2
of power. Three power supplies
1
4U8G Series
4U10G Series
25