Table of Contents
Advertisement
GENERAL
INFORMATION
Table 1-3. Available Accessories ( 1 of 2)
Test Fixtures ( coaxial termination type ) for hoiding
a piece of sample holders accommodate a cylindri-
cal sample in their respective inner chambers.
Two
kinds
of fixtures
fit samples
dimensions
given
below:
|
Fixture
Max. dimensions
04191-85302
16091-60012.
Usable frequency range: DC to 1000 MHz.
Electrical length: 1.87 cm ( typical ).
Maximum applied DC bias voltage: +40 V.
Note: The 16091A fixture of 7 mm
inner diameter
( P/N 04191-85302 ) is actually the same as the OS
standard termination.
Thus, this fixture is not sup-
plied with the 16091A fixture set since the furnished
OS termination can be used.
Test fixture for connecting
axial
and
radial
lead
components,
and leadless chip components.
The
spring clip contacts can be adjusted to the dimen-
sions given below.
і
1
2—24mm
A slide gauge provides direct read-out of the length
of the test sample.
Maximum applicable DC bias is
2150 V/t0.5 А.
Advertisement
Table of Contents
