Advertisement
• Do not place the appliance on
or near a hot gas or electric
burner, or where it could touch
any other source of heat.
• Always make sure the food
processor is completely
assembled before operating.
The appliance will not operate
unless properly assembled.
• Ensure the appliance
switched OFF, and unplugged
from the power outlet before
attaching any accessories,
including any blades or discs.
• Handle the food processor and
attachments with care. Blades,
cutting disc, and dicing grids
are razor sharp and should be
kept out of reach from children.
• Always secure the processing
bowl onto the motor base before
attaching the blades or discs.
• Do not allow the power cord to
hang over the edge of a table
or counter, touch hot surfaces
or become knotted. Unwind the
power cord fully before use.
• Keep hands, hair, clothing,
spatulas and other utensils
away from moving blades or
discs while processing food, to
prevent the possibility of severe
personal injury or damage to the
food processor. A plastic spatula
may be used, but only when
the food processor is stopped.
• Ensure the appliance motor is
off and unplug the power cord
from the outlet before removing
the lid from the processing bowl.
• Avoid contact with moving
parts. Never push food
down by hand when slicing
or shredding. Always use
the food pusher to push the
food down the feed chute.
is
• Do not fill the processing
bowl above the marked
maximum fill line for each
type of ingredient. Always add
drier or thicker ingredients to
the processing bowl prior to
adding fluids. Failing to follow
this instruction may cause
product malfunction, product
damage or personal injury due
to damage to the cover or bowl.
• Never store any blade or disc
on motor shaft. To reduce
the risk of injury, never place
cutting blade or discs on the
shaft without first putting bowl
properly in place. Store blades
and discs, as you would sharp
knives, out of reach of children
in the storage box provided.
• Be sure the lid is securely
locked in place before operating
the food processor. Never
try to override or tamper with
lid interlock mechanism.
• Always remove the plug
from the power outlet if the
EN
3
Advertisement
