Gem-Ex-R Front - Hall Technologies GEM-EX-S User Manual

GEM-EX-R Front

No. Name
1 SERVICE
2 USB 2.0 PAIRING
HDMI A/B
3
VID/LINK
4 POWER
Hall Technologies July 18, 2023
Description
•
USB-Mini connection, used for upgrading firmware or configuring parameters such as
USB mass storage class device filtering or RS-232 baud rates via free PC GUI. .
•
When only one receiver is connected to a sender, the receiver will automatically pair
by default and then the PAIRING LED will be on. If multiple receivers are connected,
the user needs to decide which receivers USB ports is to be paired with the sender.
To change pairing to a different receiver, press the button and the PAIRING LED will
light. If the pairing LED is solidly lit, the receiver has successfully paired with the
sender, but if it is blinking, the pairing was unsuccessful, and you should press the
pairing button again until the LED is solidly lit.
•
Status indicators of HDMI A/B
- VID: This LED is lit when HDMI video is being output.
- VID: When this LED is solidly on, it indicates the system has detected at least one
receiver and is actively transmitting video and data. Blinks if the system has
never seen a compatible receiver or it is not transmitting video.
•
Power LED lights when power is supplied.
Page 11 of 15