Subscribe to Our Youtube Channel
Related Manuals for Schacht SL2301
Summary of Contents for Schacht SL2301
- Page 1 SL2301 A-FRAME STAND ssembly A-FRAME STAND WITH TAPESTRY LOOM (loom not included) Find out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 303.442.3212 © 2021 Schacht Spindle Company, Inc. 10.21...
- Page 2 A-FRAME STAND ssembly TOOLS REQUIRED PARTS hammer or mallet uprights drill and 1/4" drill bit (optional) adjuster bars scrap wood (optional) 1/4-20 x 1-3/4" carriage bolts 1/4-20 x 2-1/2" carriage bolts 1/4" USS washers 1/4-20 wing nuts BEFORE YOU BEGIN Look at the sides of your tapestry loom.
- Page 3 ATTACH THE FRAME UPRIGHTS hole A From inside the loom, insert a 1/4-20 1/4-20 x 2-1/2" carriage bolt through hole A, wing nut as shown in Figure 3. Use a hammer or mallet to tap the square head of the carriage bolt into the loom side.
- Page 4 CONNECT UPRIGHTS & ADJUSTER BARS From the outer side of the loom, push a 1/4-20 x 1-3/4" carriage bolt through the lower hole in the upright and through the slot in the adjuster bar. Use a hammer or mallet to tap the square head of the carriage bolt into the upright.
Need help?
Do you have a question about the SL2301 and is the answer not in the manual?
Questions and answers