Programming The Modem - Ebyte E90-DTU User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
E90-DTU SL User Manual
(«:»)
EBYTE
Key: 0-65535
• When the user configures the repeater mode using the host computer, special attention must be paid. Since the parameters are in
decimal mode in the host computer, the module address and network ID need to be converted into hexadecimal. For example, if
the network ID input by the transmitting end A is 02, and the network ID input by the receiving end Bis 10, when the repeater
end R sets the module address, the hexadecimal value 0X020A is converted into the decimal value 522 as the repeater end R.
Module address. That is, the module address value of the repeater terminal R is 522 at this time.
11. Programming the modem
il l. Connection diagram
Operating
mode
Ml MO Note
Configuration
mode
OFF ON
Programming via the configuration software is available
only in this mode
Copyright©2012-2019, [«£19
18