Tape 2 Monitor - Pioneer VSX-405 Operating Instructions Manual

PLAYBACK
1. Use the input selector buttons to select the desired
program source.
Program Source input Selector
=
To play back on a VCR connected
to the VCR/TAPE 1 jacks, or to
play back on a cassette deck.
VCR/TAPE 1
To listen to a tape on the cassette
deck connected to TAPE 2 | TAPE 2 MONITOR
MONITOR jacks.
PHONO
To watch a LaserDisc/DVD. LD/DVD
To listen to compact discs. CD |
To listen to records.
* If you select a music source other than TAPE 2, switch
OFF the TAPE 2 MONITOR.
2. Operate the appropriate audio/video component to
playback the program source.
For a video source, switch the TV connected to this
unit to the video input mode.
3. Adjust the volume and tone controls as desired.
Refer to pages 5 and 18 for details concerning surround
operation.(Not available on the VSX-295 model)
| RECORDING WITH VCR/TAPE1 |
If the TAPE 2 MONITOR button is ON, press to turn OFF.
1. Select the source you want to record from with the
input selector buttons.
When recording to AM or FM broadcasts, select a
preset station using the STATION (+,-) button. If the
desired station has not been preset, tune in the station.
2. Start recording on the cassette deck. _ _
3. Play the desired program source (record, compact
disc, etc.).
The volume, balance and tone controls have no effect
on the recording.
| RECORDING WITH TAPE 2
1. Select the source you want to record from with the
input selector buttons.
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact
disc, etc.).
The volume, balance, and tone controls have no effect
on the recording.
When copying a tape, playback on the VCR/TAPE 1
cassette deck and record on the TAPE 2 cassette deck.
Tape monitoring
When recording is performed on a cassette deck equipped
with monitoring function, the recorded sound can be
monitored through the speaker system by pressing the
TAPE 2 MONITOR buiton to ON.
1. Select the source to record from with the input selec-
tor buttons.
When recording from a LaserDisc to VCR - LD/DVD
2. Begin recording on the VCR.
For VCR, select a line input (external input).
3. Begin playback on the component selected with the
input selector.
The volume, balance and tone controls have no effect
on the recording.
17
<ARB7065>