Table of Contents
Advertisement
Section I1
Paragraphs
2-15 t o 2-17
2-15.
To
preserve the protectionfeature when oper-
ating the instrument from
a
two-contact outlet, use
a
three-prong t o two-prong adapter and connect the
pigtail on the adapter t o ground.
2 - 1 6 .
REPACKING FOR SHIPMENT.
Model
204B
2-17. The following is a general guide for repack-
aging an instrument for shipment. If you have any
questions, contact your local
@sales
office
or repair
facility. Proceed
as
follows:
a. Place instrument in original container
if
avai-
able. If original container is not available, it can be
purchased from your nearest Hewlett-Packard Sales
and Service Office (refer to maps in Appendix).
b. If original container
is not used, wrap instru-
ment in heavy paper o r plastic before placing in
inner container.
c.
Use a heavy carton o r wooden box to house the
instrument and inner container and use strong tape o r
metal bands to seal the shipping container.
d. Mark shipping container with "Delicate Instru-
ment", "Fragile", etc. as appropriate.
Note
If instrument is to be shipped to Hewlett-
Packard for service
o r
repair, attach a tag
to instrument identifying owner,model
number, s e r i a l number, and indicating
service o r repair to be performed. In any
correspondence identify instrument by
model number and s e r i a l number,and
s e r i a l number prefix.
ADAPTER
FRAME
T
1/2 MODULE
INSTRUMENT
CLAMP
204B-M-10A
Figure
2 -4.
Two Submodule Units
in Rack Adapter
2-2
01369-3
Advertisement
Table of Contents
