Modem Selection; Dialing Properties - Toshiba Satellite A355-SC2902 User Manual

A350/A350D
Location list for region selection
Displays a sub-menu appears which details location information.
Open dialog box, if the modem and Telephony Current
Location region code do not match
Displays a warning if the current settings for both region code and
telephony location are different.

Modem Selection

If the computer cannot recognize the internal modem, a dialog box is
displayed from which you should select the appropriate communications
port for your modem to use.

Dialing Properties

You should select this item in order to display the dialing properties.
If you are using the computer in Japan, the Telecommunications Business
Law requires that you select Japan region mode. It is illegal to use the
modem in Japan with any other selection.
Connecting the modular cable
To connect the modem's modular cable, follow the steps as detailed below:
Connection to any communication line other than an analog phone line
could cause a computer system failure.
Avoid using your computer modem with the telephone cable connected
during an electrical storm. There may be a remote risk of electric shock
from lightning.
1. Plug the end of the modular cable into the computer's modem jack.
2. Plug the other end of the modular cable into a telephone jack.
4-28
Connect the built-in modem only to ordinary analog phone lines.
Never connect the built-in modem to a digital line (ISDN).
Never connect the built-in modem to the digital connector on a
public telephone or to a digital private branch exchange (PBX).
Never connect the built-in modem to a key telephone system for
residences or offices.
Figure 4-9 Connecting the internal modem
RJ11
User's Manual