How to enable/disable USB sleep and charge function
You can set enable/disable USB sleep and charge function in HW setup.
Please refer to the
Using optical disk drives
The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or
8 cm (3.15") CD/DVDs without an adaptor. A Serial ATA interface controller
is used for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows.
Use the DVD playback application to view DVD-Video discs.
Loading discs
To load CD/DVD's, follow these steps:
1. When the computer's power is on, press the eject button to open the
disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
User's Manual
USB Sleep and Charge function
Disc tray LED
Figure 4-2 Pressing the eject button
Figure 4-3 Pulling the disc tray open
in Chapter7.
Eject button
Eject hole
A350/A350D
4-3