Table of Contents
Advertisement
TO THE OWNER
Assembled in this manual are operation, lubrication,
and maintenance instructions for the Cub Cadet 1204,
1210 and 1211 Tractors. The material has been pre¬
pared in detail to help you better understand the cor¬
rect care and efficient operation of your tractor. Be¬
fore you operate the tractor, study this manual
carefully. Additional copies may be ordered from your
dealer at a nominal price.
Your local authorized dealer is interested in the per¬
formance you receive from your tractor.
He has
factory-trained servicemen, informed in the latest
method of servicing tractors, modern tools, and
original-equipment service parts which assure proper
fit and good performance.
The Cub Cadet 1211 Tractor has a hydrostatic drive
unit and will require minimum service if recommended
operation and maintenance procedures are followed.
To obtain top performance and assure economical
operation, the tractor should be
inspected,
depending on its use, periodically, or at least once a
year, by your authorized dealer.
When in need of parts, always specify the model,
chassis, and engine serial numbers, including the
prefix and suffix letters. Write these serial numbers in
the space provided on this page.
Should you have difficulties with the unit, consult your
authorized dealer. UNDER NO CIRCUMSTANCES
SHOULD YOU ATTEMPT TO SERVICE THESE
UNITS YOURSELF. Only your dealer is authorized to
repair or replace units on this drive under the terms of
the warranty. Should you desire additional Information
not found in this manual, contact your authorized Cub
Cadet dealer.
SERIAL NUMBER LOCATION
■^NOTE
LEFT and RIGHT indicate the left and right
sides of the tractor when facing forward in the
driver's seat. Reference to FRONT indicates
grille end of the tractor; to REAR, the drawbar
end.
Chassis serial number plate is located near left rear
fender. (See Figure 1.)
CHASSIS SERIAL NUMBER
Figure 1
Figure 2
MODEL_
DELIVERY DATE
5
Advertisement
Table of Contents
