Table of Contents
Advertisement
LUBRICATION GUIDE
—After Every 50 Hours of Operation
7. Transmission oil filter
(1210 and 1211 tractors only)
NOTE: After the first 50 hours only, remove
the transmission oil filter and replace with
a new filter. Refer to ''MAINTENANCE."
Change the transmission oil filter every 100
hours of operation thereafter.
—Every 100 Hours of Operation
8. Transmission oil filter.
(1210 and 1211
Tractors Only)
Change the transmission oil filter and re¬
place with a new filter. Refer to
"MAINTENANCE."
Speed Control Linkage
9. Cam plates.
(1210 and 1211
Tractors Only)
Transaxle (1204
tractor only)
10. Oil level and filler plug.
11. Oil drain plug.
12. Steering gear housing
Miscellaneous
Brake pedal shaft
Once a year, apply a small amount of 251H EP
grease or equivalent No. 2 multi-purpose
lithium grease in the slots.
Check the oil level at the beginning and
end of each season. Keep the lubricant up to
level plug 9 or to "FULL" mark on dipstick.
Every 100 hours or yearly use 251H EP
grease or equivalent No. 2 multi-purpose
lithium grease. Apply two strokes with lubri¬
cator.
Lubricate the brake pedal shaft and linkage
with eight or ten drops of engine oil.
32
Advertisement
Table of Contents
