Tekno Point ATHENA A-0732 User And Installation Manual page 90

Function button
1. In main menu, press
(1) Heating mode
The left side of the screen shows the set water temperature of buffer tank; The right side of the screen shows
the measured water temperature of buffer tank. Press
buffer tank, the maximum water temperature can be set is 60°C.
(2) Cooling mode
The left side of the screen shows the set water temperature of buffer tank; The right side of the screen shows
the measured water temperature of buffer tank. Press. Premere
ture of buffer tank, the minimum water temperature can be set is 8°C.
(3) DHW mode
The left side of the screen shows the set DHW water temperature; The right side of the screen shows the me-
asured DHW water temperature. Press
DHW water temperature can be set is 55°C. DHW status
90
button to switch working mode. The units have 5 working modes as below:
Heating status
Cooling status
or to adjust the set DHW water temperature, the maximum
Heat pump status
or to adjust the set water temperature of
or to adjust the set water tempera-