1
2
4 Turn the retaining ring counterclockwise and lift it off
the shaving head.
Repeat this process for the other retaining rings.
Place them aside in a safe place.
5 Remove the shaving heads from the shaving head
holder. Each shaving head consists of a cutter and
guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
6 Clean the cutter and guard under the tap.
You can also use the cleaning brush to remove
excess hairs before rinsing.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head holder.
10 Place the retaining ring on the shaving head.
42
42
English