Using Standard Ac Power - Radio Shack DX-399 Owner's Manual

Using Standard AC Power
You can power the receiver from standard AC power using the sup-
plied universal adapter.
Cautions :
You must use a Class 2 power source that supplies
4.5
Volts DC and delivers at least
200 mA.
Its center
tip must be set to negative and its plug must fit the
DX-399's
DC
IN
4.5V
jack. The supplied adapter meets these
specifications. Using an adapter that does not meet these
specifications could damage the DX-399 or the adapter.
- Always unplug the adapter from the AC outlet fi rst, then unplug
it from the receiver.
Insert the adapter's barrel plug into the receiver's
DC
IN
4.5V
jack,
then plug the adapter into a standard AC outlet.
DC
IN
4.5V
Jack
10