Table of Contents
Advertisement
Available languages
Available languages
The operation
of any tiller
can result in foreign
objects
thrown
into the eyes,
which
can result
in severe
eye damage.
Always
wear safety
glasses
or eye
shields
before
starting
your tiller and while tilling.
We recommend
standard
safety
glasses
or a wide vision
safety
mask worn
over spectacles.
HOW TO USE YOUR TILLER
Know
how to operate
all controls
before
adding
fuel and oil or attempting
to start
engine.
STOPPING
TINES
1. Release tine control to stop movement.
ENGINE
2. Move throttle control to "SLOW"
position and allow the engine to run
slowly for cool down.
3. Turn the engine switch to the "OFF"
Position.
4. Turn the fuel valve lever to the "OFF"
Position.
NOTE: Never use choke to stop engine.
IMPORTANT:
To stop engine in an emer-
gency, turn the engine switch to the OFF
position.
Tine Control
"Off" (UP) Position
Throttle
Engine
Fuel
Control
Switch
Valve
TILLING
The speed
and depth
of tilling
is regulated
by the position
of the depth
stake
and
wheel
height.
The depth
stake
should
always
be below
the wheels
for digging.
It serves
as a
brake
to slow the tiller's
forward
motion
to
enable
the tines to penetrate
the ground.
Also, the more the depth
stake
is lowered
into the ground
the deeper
the tines will
dig.
DEPTH STAKE
Adjust
depth
stake
by removing
the hairpin
clip and clevis
pin.
Change
depth
stake
to desired
position.
Replace
the clevis
pin
and hairpin
clip.
• For normal
tilling,
set depth
stake
at the
second
or third hole from the top.
WHEELS
Adjust wheels by removing the hairpin clip
and clevis pin. Change wheel position.
Replace the hairpin clip and clevis pin.
• For normal tilling, set wheels at the
second or third hole from the top.
Hairpin Clip and
Clevis Pin
Depth
Stake
Throttle
Control
Fuel
Valve
Engine
Switch
TINE OPERATION
• Squeeze
tine control
to handle.
Wheel
Spring
8
TO TRANSPORT
AI:_CAUTION:
Before
lifting or transporting,
allow tiller engine
and muffler
to cool.
Dis-
connect
spark
plug wire.
Drain gasoline
from fuel tank.
AROUND
THE YARD
1. Tip depth
stake forward
until it is held
by the stake
spring.
2.
Push tiller handles
down,
raising
tines
off the ground.
3.
Push or pull tiller to desired
location.
Advertisement
Table of Contents
