KNX/EIB Push button sensor 3 Plus F100 Intended use Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values, temperatures, calling up and saving light scenes, etc. Measurement and feedback control of the room temperature Installation on bus coupling unit 3 in appliance box to DIN 49073 Product characteristics The pushbutton functions switching, dimming, controlling blinds, valuators, calling up moods, etc.
Page 3
KNX/EIB Push button sensor 3 Plus F100 n, o Move up/down in the list <, > Move to the left/right in the list +, – Increase/reduce setting i The display changes for individual operation steps. The system returns to the basic display automatically after approx.
Page 4
KNX/EIB Push button sensor 3 Plus F100 Select week Mon...Son, Mon...Fri, weekend Sat...Son or an individual weekday and press Select operating mode for the switching time and press OK. For the next 15 seconds the display summarises the settings for the selected program slot. Confirm with OK.
Page 5
KNX/EIB Push button sensor 3 Plus F100 (11) Inscription panel (12) Rocker cover picture 4 (13) Anchor (14) Fastening screws The bus coupler 3 is connected to the bus and mounted in an appliance box. i Use only bus coupler 3 – without a programming button. It is not possible to combine it with other bus couplers.
Page 6
KNX/EIB Push button sensor 3 Plus F100 5.2 Commissioning Loading the physical address and application software picture 5 (15) Programming LED (16) Programming button The programming button and LED are located under the rocker covers (picture 5). The rocker cover (12) and rocker support (10) over the programming button are dismantled. i If the device does not receive any application software, or the wrong application software, then the operation LED (4) flashes.
We provide a warranty as provided for by law. Please send the unit postage free with a description of the defect to our central customer service via your specialised dealer: Gira Giersiepen GmbH & Co. KG Service Center Dahlienstraße 12...
This manual is also suitable for:
Push button sensor 3 plus 3-gang 1+2 f100Push button sensor 3 plus 6-gang 3+3