7. Operating unit
1. Main switch
2. Display
3. Detergent switch
4. Steam setting knob
5. Connecting Block for hose
6. Pressure display
7. Water - Filler cap
8. Detergent tank cap
9. Vacuum switch
9a. Dirty water tank
Preparation and deployment:
Open the cap (7) and fill the tank with water
Notice:
If the available water should be "very hard" (> 11°dH)
it is recommended to use 50% demineralized water or
water or distilled water, (to avoid excessive limestone
formations and to ensure sufficient to be sufficiently
conductive be)
7