Philips HD9270/20 User Manual page 15

Problem Possible cause
The amount of
ingredients in the
basket is too big.
Certain types of
ingredients need to
be shaken halfway
through the cooking
time.
The Airfryer does The appliance is not
not switch on. plugged in.
Several appliances
are connected to one
outlet.
I see some Some small spots can
peeling off spots appear inside the pan
inside my Airfryer. of the Airfryer due to
the incidental touching
or scratching of the
coating (e.g. during
cleaning with harsh
cleaning tools and/
or while inserting the
basket).
White smoke You are cooking fatty
comes out of the ingredients.
appliance.
The pan still contains
greasy residues from
previous use.
Breading or coating did
not adhere properly to
the food.
Marinade, liquid
or meat juices are
splattering in the
rendered fat or grease.
My display shows The device is broken/
"E1". defect.
Solution
Follow the instructions on page 14
in this user manual to prepare home-
made fries.
Follow the instructions on page 14
in this user manual to prepare home-
made fries.
Check if the plug is inserted in the wall
outlet properly.
The Airfryer has a high wattage. Try a
different outlet and check the fuses.
You can prevent damage by lowering
the basket into the pan properly. If you
insert the basket at an angle, its side
may knock against the wall of the pan,
causing small pieces of coating to chip
off. If this occurs, please be informed
that this is not harmful as all materials
used are food-safe.
Carefully pour off any excess oil or
fat from the pan and then continue
cooking.
White smoke is caused by greasy
residues heating up in the pan.
Always clean the pan and the basket
thoroughly after every use.
Tiny pieces of airborne breading
can cause white smoke. Firmly press
breading or coating to food to ensure
it sticks.
Pat food dry before placing it in the
basket.
Call the Philips service hot line or
contact the Consumer Care Center in
your country.
ENGLISH
17