Pioneer SX-2600 Operating Instructions Manual page 8

330 Hz: The 330 Hz control will allow you to vary the upper bass
frequencies.
The 1 kHz control is the presence controi and can be used
very effectively to emphasize, or deemphasize vocalists.
+ De-emphasize
frequency range.
1 kHz:
AM or FM broadcasts.
AUTO TUNING (FM reception)
The electronic tuning circuit inside the unit will search for the station.
3 5
4. Prass the FM TUNING AUTO/MANUAL switch to
establish
the MANUAL
tuning mode
(the AUTO
indicator goes off} during FM reception.
Use the TUNING switches to locate the frequency of
the desired station.
3.5
. Turn on the POWER switch of the unit.
. Press the TUNER switch of the function switches.
. Set the BAND selector switches for FM reception.
. Press the FM TUNING AUTO/MANUAL switch to
establish the AUTO tuning mode (the AUTO indicator
lights).
5. Press the TUNING switches "UP + " or "DOWN
~" for a higher or lower frequency as desired.
PWN —
Fy
The frequency will change rapidly during scanning. The AUTO
TUNING will stop automatically when the station is located and the
TUNED indicator will light up.
NOTE:
When the AUTO TUNING is if use, reception tay not be possible over
long distances or when signals are weak, At these times manual nuning
#8 recommended.
6. Adjust the volume with the VOLUME control and the
tone with the GRAPHIC EQUALIZER controls.
8
<ARBI1214 >
NOTE:
distances or when signals are weak,
6. Adjust the volume with the VOLUME control and the
tone with the GRAPHIC EQUALIZER controls.