Kenwood 103AR Instruction Manual page 10

: Keys or controls to be used in this operation
mm
A, B OFF
Sound
IS
not output from the speakers. Use this setting
for
listening
through headphones, etc
A ON
Sound
IS
output from the speakers connected to the SPEAKERS A
terminals on the rear panel
B ON
Sound IS output from the speakers connected to the SPEAKERS B
terminals on the rear panel
A, B ON
Sound isoutputfrom the speakers connected to the SPEAKERS Aand
B terminals on the rear panel.
The input sources are switched in the following order:
r*- .1
TUNER
(frequency display)
A O L J 1^' ^ ' M
2 I r I (^11 SI L»
r
Tt
The selected source
is displayed.
3
4' I'l:
■ 5 TRf
SPEAKiRS
fesia
j-o
T(
±1
• If a KENWOOD MD recorder connected through the system
remote control cord in the (SL161 mode, it is necessary to
change the TAPE input to MD input using the following proce¬
dure
1 Select the input name to be changed.
2
Press and hold the AUTO/MANUAL key for more than 2
seconds.