Table of Contents
Advertisement
14. Remove the nozzle cover
and metal wand by pulling
the metal wand down.
15. Wash the nozzle cover by
holding it under warm tap
water and clean the hole
using a needle or brush.
16. Wash the metal wand by
holding it under warm tap
water and clean the hole
using a needle or brush.
17. Install the metal wand
back into the nozzle cover.
Then install the nozzle cover
back on by pushing it up-
wards. Lock it by turning it
to the right.
VIII. Turning Off
the Machine
Turn the machine off by pressing the On/
Off button.
IX. Automatic Turn Off
The appliance has an automatic turn-off
function. Depending on the mode you
have selected, the automatic turn-off
time of the appliance varies.
Other Settings
J
I. Adjusting the Amount
of Coffee/Hot Water
For both strong and soft coffee, you can
set the amount of coffee and the amount
of hot water you want between 25 ml
and 250 ml.
1. Press and hold the button of your
choice while making your coffee
(strong espresso, soft espresso) or
getting hot water. The appliance
continues to prepare your coffee.
2. Release the button when you reach
the desired amount. When you hear
two beeps, the amount of coffee is
memorized.
II. Grinding Setting
You can adjust the grinder as desired by
turning the adjustment knob on the bean
container.
During the coffee making phase, you can
adjust the setting by turning the adjust-
ment knob while the grinder is grinding
your coffee (CAUTION: Do not adjust
the grind setting when the grinder is not
running. Otherwise the grinder may be
damaged).
2. The dots on the adjustment knob indi-
cate the grinding fineness.
III. Mode Selection
The machine has three settings: ECO
(Economy) mode, speed mode and de-
13
Advertisement
Table of Contents
