Table of Contents
Advertisement
the soft coffee button
on the coffee you prefer to drink.
5. The light of the pressed coffee button
and the illumination light up to indi-
cate that the appliance is preparing
the coffee.
6. When the appliance returns to stand-
by status, your coffee is ready to be
served.
Tip 1: The strong coffee button is recom-
mended for espresso, offering a more
intense coffee, and the quantity of both
coffee buttons can be adjusted.
Tip 2: If the appliance is turned off only
for a while, automatic rinsing will not
appear. You can enable or disable this
function by following the steps below.
Step 1) Remove the service cover.
Step 2) Press the On/Off button until
you hear beep.
Note: Before using the machine for the
first time, press the hot water button to
clean the inside and let it clean for about
30 seconds.
II. Filling the Water Tank
If
is flashing, there is not
enough water in the water
tank. In this case, the tank
must be filled with water.
1. Lift the water tank using
the cover.
, depending
2. Rinse the water tank
Note: To avoid overflowing
the water in the water tank,
do not pour water directly
into the appliance from
another container.
IMPORTANT: Never put warm/hot
water, mineral water or any other liquid
in the water tank. These will damage
the water tank and the machine.
III. Filling the Coffee
Bean Container
If
beans in the appliance.
1. Remove the cover of the bean con-
2. Slowly add the coffee beans.
3. Put the container cover back on.
IMPORTANT: Only put coffee beans in
the coffee bean container. Ground cof-
fee, instant coffee, caramelized coffee
and other products can damage your
machine.
10
with clean water, fill it
with water up to the
"Max" level and put it
back in the machine.
Make sure that it is well
placed.
is flashing, you need to put coffee
tainer.
Advertisement
Table of Contents
