Table of Contents
Advertisement
ASSEMBLY
CONNECT SHIFT ROD (See Fig. 6)
•
Insert end of shift rod farthest from bend into hole of
shift lever indicator,
•
Insert hairpin clip through hole of shift rodto secure,
•
Insertother end of shift rod _ntohole in shift lever,
,
Insert second hairpin clip through hole of shift rod.
REMOVE TILLER FROM CRATE
•
Make sure shift lever indicator ts in "N" (neutral) posi-
tion (See Fig, 6)
•
Tilt tiller forward by Iiftirlg handie_ Separate cardboard
cover from leveling shield.
•
Rotate tiller handle to the right and pull tiller out of
carton,
ATTACH THIS END
AI"TACH THIS
TO SHIFT LEVER
END TO SHIFT
INDICATOR
LEVER _,,1
........
.....................
SHIFT ROD
SHIFT
HAIRPIN
SHIFT
CLIP
LEVER
INDICh;TOR
HAIRPIN CLIP
SHIFT ROD
INSERT CABLE CLIP (See Fig. 7)
•
Insert plasticcable clip intohole on the back of handle
column. Push cables into clip.
CABLES
'CABLE CLIP
FIG. 7
CHECK
TIRE
PRESSURE
The tires on your unit were ovednflated at the factory for
shipping purposes, Correct and equal tire pressure is
importantfor best tilling performance.
•
Reduce tire pressure to 20 PSt.
HANDLE HEIGHT
•
Hand!eheight may be adjusted to better suitoperator.
(See TO ADJUST HANDLE HEIGHT' in the Service
and Adjustments section of this manual).
FIG, 6
8
Hide quick links:
Advertisement
Table of Contents
