Espressif ESP32-S3-BOX-3 User Manual page 16

You can use voice commands to enjoy music. First, wake up the device, then say
This will launch the music player and start playing built-in music. You can also use voice commands to
pause or skip songs. There are two built-in songs.
Tips:
If the LED light fails to turn on, check whether the module pins are inserted into the right ports.
If the BOX doesn't recognize any command within the designated timeframe, a
will appear, and the screen will exit in approximately 1 second.
The default commands are:
a song, next song,
Continuous Speech Recognition
More interestingly, the device supports continuous speech recognition after waking up. This feature adds
a natural and seamless quality to voice interaction, enhancing the interactive experience with a human
touch.
How to use
Say
"Hi, E. S. P"
Speak your command. Upon successful recognition, you will hear
ready for further commands.
If no command is identified, the device will wait. Should no commands be given within 6 seconds, the
device will autonomously exit the voice control screen and you need to wake it up again.
turn on the light,
pause playing.
to wake up the device, and you will hear a beep.
turn off the light, turn
"OK"
16
"Sing a song"
message
Timeout
red, turn green, turn blue,
, and the device will remain
.
sing