Transport Screws - Rotel RCD-965BX Owner's Manual

ENGLISH
STEREO COMPACT DISC PLAYER RCD-965BX
Thank you for purchasing the ROTEL Compact
Disc Player.
CAUTION : READ THIS BEFORE OPERATING YOUR
PLAYER.
1. The product is a sophisticated Compact Disc Player.
To ensure proper operation for the best possible sound
reproduction, please read this manual carefully.
2. Choose the installation location of your player care¬
fully. Avoid placing it in direct sunlight or close to a source
of heat. Also avoid locations subject to vibration and ex¬
cessive dust, heat, cold or moisture. Keep away from such
sources of hum as transformers or motors.
3. Do not open the cabinet as this might result in damage
to the set or electrical shock. If a foreign object should get
into the set, contact your dealer.
4. Be sure not to handle discs with dirty fingers. Never
insert a disc which has a crack on the surface.
5. When removing the power plug from a wall outlet,
always pull directly on the plug, never yank the cord.
6. Do not use force when using the switches and knobs.
7. When moving the set be sure to first pull out the power
plug and remove cords connecting to other equipment.
8. To keep the laser-pickup clean, do not touch it, and
do not forget to close the disc tray.
9. Do not attempt to clean the player with chemical
solvents as this might damage the finish. Use a clean, dry
cloth.
10. Be sure to read the Troubleshooting" section for
advice on common operating errors before concluding
that your player is faulty.
11. Keep this manual in a safe place for future reference.
TRANSPORT SCREWS
To protect the internal laser pick-up mechanism from
excessive shock during transit, it has been secured by
special transport screws. These screws are attached on
the bottom of the unit. Be sure to remove the transport
screws before you turn your player on.
1. Carefully place the unit on its left side. Do not subject
it to any shocks.
2. Turn and remove the transport screws.
3. Place the screws in a safe place, perhaps with this
manuals, as they may be needed in the future.
4. If you are going to transport your player, be sure to
replace the transport screws. Be sure that there is no disc
in the player before replacing the screws. Reverse the
previous instructions to replace the screws.
CAUTION: Use of controls or adjustments, or per¬
formance of procedures other than those specified
herein may result in hazardous radiation exposure.
DANGER- INVISIBLE LASER RADIATION WHEN
OPEN THE TOP COVER, AVDIO DIRECT EX¬
POSURE TO LASER BEAM.
CLASS 1 LASER PRODUCT
PRODUCT COMPLIES WITH DHHS 21 CFR
1040.10 AND 1040.11.
FRONT PANEL AND THEIR FUNCTIONS
1. POWER Switch
Supplies power to your player. The LED indicator lights
when ON.
2. Disc Tray
Holds a compact disc for playing. Slides out for loading
and unloading when the OPEN/CLOSE switch is pressed.
3. OPEN/CLOSE Key
When pressed, slides the disc tray out of the unit (OPEN
operation) or retracts the disc tray into the unit (CLOSE
operation).
4. Remote Sensor
The target eye for the remote control handunit (transmitter)
provided with the player.
5. MULTI- FUNCTION DISPLAY Panel
Provides comprehensive information on disc selections,
disc playback status, player operating status, and all
programming procedures.
Disc Size Indicator: Either disc marking with "12" or "8" will
light up automatically when a disc is inserted and the tray
closed. The former indicates the normal size disc, and the
latter indicates the smaller "CD single" disc.
CLASS 1 LASER PRODUCT
2