Operation And Important Riding Points; Starting The Engine - Yamaha Fazer 8 2014 Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15952
TIP
This model is equipped with:
 a lean angle sensor to stop the en-
gine in case of a turnover. In this
EWA10272
case, the display will indicate error
code 30, but this is not a malfunc-
tion. Turn the key to "OFF" and
then to "ON" to clear the error
code. Failing to do so will prevent
the engine from starting even
though the engine will crank when
pushing the start switch.
 an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start
switch to restart the engine.
EAU48712

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
 The transmission is in the neutral
 The transmission is in gear with
1. Turn the key to "ON" and make
NOTICE
If the above warning lights or indica-
tor light do not come on initially
when the key is turned to "ON", or if
5-1
position.
the clutch lever pulled and the
sidestand up.
See page 3-25 for more informa-
tion.
sure that the engine stop switch is
set to " ".
The following warning lights and
indicator light should come on for
a few seconds, then go off.
 Oil level warning light
 Coolant temperature warning
light
 Engine trouble warning light
 Immobilizer system indicator
light
EAU51792
5
ECA17671