Lenovo 30D2 User Manual page 60

7. Press Enter to initiate volume creation.
8. When prompted, press Y to accept the warning message and create the volume.
9. Return to step 2 to create additional RAID volumes, or select Exit and press Enter.
10. Press Y when prompted to confirm the exit.
Deleting RAID volumes in legacy mode
To delete RAID volumes, do the following:
1. Press Ctrl+I when prompted to enter the Intel (R) Rapid Storage Technology configuration utility during
the computer startup.
2. Use the up and down arrow keys to select Delete RAID Volume and press Enter.
3. Use the arrow keys to select the RAID volume to be deleted and press Delete.
4. When prompted, press Y to confirm the deletion of the selected RAID volume. Deleting a RAID volume
will reset the storage drives to non-RAID.
Resetting storage drives to non-RAID in legacy mode
To reset your storage drives to non-RAID, do the following:
1. Press Ctrl+I when prompted to enter the Intel (R) Rapid Storage Technology configuration utility during
the computer startup.
2. Use the up and down arrow keys to select Reset Disks to Non-RAID and press Enter.
3. Use the arrow keys and the space key to mark individual physical storage drives to be reset, and then
press Enter to complete the selection.
4. When prompted, press Y to confirm the reset action.
42
P330 User Guide