Table of Contents
Advertisement
1. Attach the valve mount bracket (Pt.
No. 41H01) to the main frame as
indicated on Pg. 6-4 with the fasteners
provided.
2. Mount the hydraulic control valve
assembly (Pt. No. 20P88) to the valve
mount bracket as shown on Pg. 6-4
with the fasteners provided. Attach air
shift kits (Pt. No. 20P95) to the
hydraulic control valve. Reference
installation instructions included with
the air shift kits.
3. Install the hydraulic adapters and
connect the hydraulic hoses and
tubing (Pt. Nos. 11P98, 11P99 &
13P11) to the control valve assembly
as indicated on Pg. 5-9. The tubing
should be supported by the clamp
assemblies that are provided in the
Loose Parts Box (See Pg. 5-7).
4. Determine the best location in the cab
for the control handle assembly (Pt.
No. 20P72). The location should be
such that the controls can be easily
reached while operating the truck. A
control handle console (Pt. No.
51H27) is provided to facilitate the mounting of the control handles (see illustration on the
right).
5. Install the air fittings and hose as shown on Pg. 6-5 (Air Circuit Plumbing Diagram). An air
pressure protection valve (Pt. No. 20P74) is provided so you can tap into the truck's air
supply without jeopardizing the integrity of the air system. The air hose is provided in a bulk
length, which you can cut to length as required for running the air lines. Take care in routing
the air lines and avoid hot areas such as exhaust pipes, etc.
2-6
CONTROLS INSTALLATION - AIR SHIFT (OPTION)
Section II: Installation
2.0.INS.SL-412
Advertisement
Table of Contents
