Inserting An Optical Disc - Toshiba Qosmio X305-Q701 User Manual

102
Learning the Basics
Using the optical drive

Inserting an optical disc

To insert an optical disc into the drive:
1 Make sure the computer is turned on.
The drive will not open if the computer's power is off.
2 Make sure the drive's in-use indicator light is off.
3 Press the drive's eject button.
The disc tray slides partially out of the drive (about 1 inch).
4 Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
5 Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in
discs" on page
6 Place the disc carefully in the disc tray, label side up.
(Sample Illustration) Positioning the disc in the drive
7 Gently press the disc onto the center spindle until it clicks into
place.
105.
"Caring for optical