Table of Contents
Advertisement
Slot A
(Sample Illustration) Inserting the memory module into the slot
14 Replace the memory module slot cover and secure it using the
screws.
15 Re-insert the main battery. For more information on inserting
the main battery, see "Inserting a charged battery" on page 40.
16 Turn the computer right side up.
17 Reconnect the cables.
18 Restart the computer.
Removing a memory module
If you need to remove a memory module:
1
Complete steps 1–8 in "Installing a memory module" on
page 25 to shut down the computer and open the memory
module slot cover.
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
Adding memory (optional)
29
Slot B
Advertisement
Table of Contents
