Computer System And Software Requirements; Connecting The Usb-Pmbus Adapter - Flex FAB8020785/B User Manual

KEP 91017 FAB8020785/B
USB-PMBus Adapter USB-PMBus Adapter
2.2
3

Computer system and software requirements

System requirements:
•
Pentium 1GHz or better processor
•
At least 512 MB of RAM
•
10 MB of available hard-disk space
•
USB 1.0 port or higher
Supported operating system:
•
Windows XP Pro SP2 and later 32-bit Windows version
The following software environment is required:
•
Windows Installer 3.1 or later

Connecting the USB-PMBus adapter

In the figure below it is shown how to connect the USB-PMbus adapter to, for
example, Flex's POL design board (ROA 128 3836 R2A). The 10-pin ribbon cable
is connected to the board. The USB shall be connected to one USB port of your
PC.
User Guide
User Guide
28701- FAB8020785 Rev. A
28701- KEP 91017
© Flex
© Flex
7
8
August 2018
August 2018