Flex FAB8020785/B User Manual page 5

KEP 91017 FAB8020785/B
USB-PMBus Adapter USB-PMBus Adapter
By default, the PMBus data and clock lines are pulled up internally to 3.3 V. If an
external ones are used, please make sure to pull up to 3.3V only. Operation from
5V is not specified and may permanently damage this USB-PMBus adapter.
This equipment is intended for use in a laboratory test environment only. It
generates, uses, and can radiate radio frequency energy and has not been tested
for compliance with the limits of computing devices pursuant to subpart J of part
15 of FCC rules, which are designed to provide reasonable protection against
radio frequency interference. Operation of this equipment in other environments
may cause interference with radio communications, in which case, the user, at
his/her own expense, will be required to take whatever measures may be required
to correct this interference.
User Guide
User Guide
28701- FAB8020785 Rev. A
28701- KEP 91017
© Flex
© Flex
Attention!
Observe precautions
electrostatic sensitive device
2
5
August 2018
August 2018