Advertisement
g
| jos wi Faéo0
9. To check the transmit frequency press the REV key.
The transmit frequency will appear in the display.
@Call Channel
1. Press the VFO key to select the VFO mode.
2. Select the desired Call channel frequency, tone data,
etc.
3. Press the F key momentarily. The F indicator will
light and the memory channel indicator will light.
. Press the CALL key within 10 seconds of pressing the
F key to enter the data into memory. A long beep will
sound and the F indicator and memory channel
indicators will turn off to confirm data entry.
>
4-4-6.
Memory Channel Recall
a
memory channel will light on the display.
. Rotate the Tuning control or press the microphone
UP/DWN keys to select the desired memory channel.
iS)
32
. Press the MR key to select the memory mode. The last
4-4-7.
Memory Banks
@Memory Bank link
Adjacent banks may be linked and used as one large
bank. All banks can be linked.
Example
Banks 1 + 2
Channels (1 to 20)+(21 to 40)
Bank 3
Channels 41 to 60
Banks 4 + 5
Channels (61 to 80)+(81 to 100)
1. Press the F key. The F indicator will light.
i
. Display the highest channel number (20, 40, 60, or
80) of the desired bank using the tuning control or
microphone UP/DWN keys.
BANK
1
exes
TH. 19, 20
| (O45
44000
70000
|
@,. 40. 60 or 80
Advertisement
