Advertisement
CALL key
Press this key to activate the
call channel function.
Pressing the key for longer
than 1 second will initiate
VFO/CALL or MEMO/CALU
scan.
Pressing the F key
momentarily and then
pressing this key will store
the currently displayed data
into the Call channel.
SHIFT
key
Pressing this key
will cause the
radio to shift from
one offset
direction to the
other, i.e. "+" to
"—" to simplex
where no
indicator shows.
("—" to "—" for
European
version)
REV / STEP key
This key is used to reverse the
transmit/receive frequencies
during repeater operations. If
you have selected simplex this
key will not function.
Pressing the F key
momentarily and then
pressing this key will allow
you to select the desired VFO
tuning step and scan step size.
Use the tuning control to select
the desired tuning step.
LOW / DIM key
This key is used to select
the transmit output
power level.
Pressing the F key
momentarily and then
pressing this key will
allow you to select the
desired display intensity
with the main tuning
control. Four intensity
selections are possible.
TONE / T.ALT key
Pressing this key causes the radio
to select the desired tone signalling
mode(T, CTCSS, OFF).
Pressing the F key momentarily
and then pressing this key will
activate the T.ALT function.
DTSS key
A unique audio tone has been
With Optional DTU-2 ;
or off) .
programmed for each key. The tone
will sound whenever a key is pressed.
Pressing this key selects the desired
tone signaling mode (DTSS, Paging,
14
MUTE / ABC key
This key is used to lower the
receive audio level by —20dB.
Pressing the F key momentarily
and then pressing this key will
toggle the ABC function on or off.
Advertisement
