PRIXTON THOR Manual page 16

3. Hold the dust cup and press the arrow to take out the filter assembly. Clean up the dust
4. Clean up the dust, wash the filter assembly and filter with water, and dry them.
Dust cup Reset
A. Put the filter element into the filter
assembly, align the positioning shape of the
inlet on the filter assembly with the positioning
shape of the dust cup inlet, and then push the
filter assembly into the dust cup. When the
filter unit is flat and cannot be moved down,
the unit is placed in place.
B. Hold the host and press the disassembly dust
cup component in the opposite direction. Align
the reference point of unlocking dust cup on
the dust cup with the reference point of the
host
Filter
Filter Assemble
16
Dust cup