Operation - PRIXTON THOR Manual

Operation

Note: Air-inlet must be kept unobstructed, and there are no foreign bodies blocked,
otherwise will cause the motor overheating causes the accident .
Operation: press the handle on the power switch, the machine open, belongs to low mode,
work to push the button once again, when need to turn it off, continue to press the switch
button, the vacuum cleaner stops working.
Working state: low model high mode shutdown.
Note
Note that the speed regulation button does not need to be pressed for a long lime in the
work. After the work of the machine, the display window of the battery pack will display
the power, and the indicator light will gradually go out with the decrease of the power.
Until it is all out. The machine has stopped working and needs recharging.
Charging
The charging port of the machine is at the tail of the machine. Remains closed to vacuum
cleaner, put cleaner configuration power adapter plug one end nto the power suply, the
region round plug end insert the charging jack on the vaccum cleaner battery pack, when
connected to the upper part of the vacuum cleaner will become blue lights flasshing,
when light into three blue lights all, don't blink after said vacuum cleaner battery has been
charged, can pull out the power adapter plug, the vacuum cleaner can be used again.
Note: the power adapter must use the adapter configurred by this machine. After the
power adapter is charged, it should be connected to the power supply line in time.
Battery indicator
14
Low power
Full power
Charging
Battery indicator
light