Page 1
KWBMW15 1 SERIES (F20/21) 2012-2016 2 SERIES (F22/23/87) 2014-2019 INSTALLATION MANUAL V1.0421 This dash image is a visual representation for display purposes only. The information provided in this document is subject to change without notice due to changes and/or improvements to the product/s.
The KWBMW15 installation kit allows for the retention of the vehicle’s steering wheel controls and maintains the original aesthetic of the interior when installing a new car stereo. The KWBMW15 gives you everything you need for a complete install in one box. The components of this kit are compatible for the BMW 1 Series (F20/21) (2012-2016) and BMW 2 Series (F22/23/87) (2014-2019) with MOST amplified NBT iD5 systems.
Page 3
FITTING GUIDE STEREO REMOVAL 1. Begin by using a bojo tool to remove the panel below the climate control assembly and disconnect the wire in the process. 2. Using a bojo tool again, remove the air vent panel/air vents, when free, pull out of the dashboard and disconnect the wiring behind.
Page 4
FITTING GUIDE FASCIA PLATE SET-UP 1. Take the climate control panel and relocate the climate control buttons out and into the new fascia. Ensure when placing that the middle clip is lined up correctly for the perfect fit. 2. Attach the brackets to the new stereo using the screws within the kit. With the brackets attached, offer the whole unit to the back of the fascia and test fit within the vehicle to gauge the correct depth.
Page 5
STEERING WHEEL CONTROL FUNCTIONALITY Please note: configuration layout may differ dependent on vehicle model. MODE Original Button New Function 1. Track +/- (Scroll) 1. Track +/- (Scroll) Push in for Mute 2. Mode 2. Mode / OEM Unit Control 3. Speech 3.
WIRING DIAGRAM Quadlock Connector [ Connect to quadlock c LVDS Connector [Male] Connect male connector to the OEM display. Ring Terminal Connect to a source of ground LVDS Connector [Female] Connect female connector to the re-routed OEM head unit (in boot). Quadlock Connector [Female] Connect to re-routed OEM Data Extension Cable [Male to Female, 4 Pin]...
Page 7
WIRING DIAGRAM Flying Wires Pink - Speed Pulse Male ISO Connector [Male] Green - Park Brake Connect to aftermarket stereo connector from vehicle Purple - Reverse Gear Brown - Mute White/Red RCA Connectors Connect to aftermarket stereo Speaker Box Connector [2 Pin] Connect to Main Wiring Loom Speaker Box .
TECHNICAL ASSISTANCE If at any point you experience any problems and need any assistance before, during or after the installation process, please contact us via : Phone: 01420 470 605 E-Mail: help@topvehicletech.com Mon - Fri 9am - 5.30pm GMT If you would like to download a digital copy of this manual, or any other product, then please visit the www.topvehicletech.com website.
Need help?
Do you have a question about the KWBMW15 and is the answer not in the manual?
Questions and answers